Cabin-Safe Boat Survey Tester                                         

Overview of the Cabin-Safe

A smaller, less powerful version of Class Instrumentation Ltd’s CARGO-SAFE™ unit, this boat survey product is perfect for detecting the source of leaks in small pleasure craft, yachts, cars and caravans.  To use the Cabin-Safe, the Transmitter unit is placed inside the vessel and the Receiver microphone is used to inspect seals, doors and windows on the outside for places of potential water ingress.  Ultrasound will be detected on the exterior of the craft if a hole is present in the structure.  Any holes can lead to water ingress.

Cabin-Safe Applications

	Testing the weather tightness of yacht cabins windows hatches caravans cars
	Checking for holes in ship containers fuel tanks double glazing fridge seals

The Complete Cabin-Safe Boat Survey Kit includes: 

Transmitter unit Receiver unit Flexible microphone and lead Hard hat compatible headphones Full operating instructions 4 x 9v PP3 batteries Foam-lined black polymer carry case

Cabin-Safe Technical Specifications

Features: The Receiver unit comes with built-in microphone and headphones as well as the external ones provided. Both Receiver and Transmitter units have low battery indicators Transmitter Unit Dimensions: 110 x 70 x 34mm Transmitter Unit Weight: 190g Receiver Unit Dimensions: 110 x 65 x 27mm Receiver Unit Weight: 130g Microphone Dimensions: 330 x 10 x 10mm Microphone Weight: 110g Temperature Range: -10ºC to +50ºC Transmitter Power Supply: 1 x 9vPP3 batteries Transmitter Battery Life: 30 hours nominal with a PP3 alkaline batteries Receiver Power Supply: 1 x 9vPP3 batteries Receiver Battery Life: 40 hours nominal with a PP3 alkaline batteries Carry Case Dimensions: 450 x 370 x 100mm Operational Weight: 400g Shipping Weight: 1.8Kg

How to operate the Cabin-Safe boat survey tester

1. Switch on the Transmitter unit and place inside the vessel.

2. Outside, close all doors, hatches and windows.  Plug the microphone and headphones into the Receiver.

3. Inspect the vessel, holding the microphone against the external wall. Any gaps through which air or water can pass will allow the ultrasonic signal to pass and will be detected by the microphone.

4. The flexible microphone allows the position of any potential leaks to be identified with pin-point accuracy. The size of the problem is established by the strength of the signal detected.
 

Accreditations

American Bureau of Shipping Classification Society Manufacturing Process Approval
ISO 9001:2000 Certificate Number GB13487
NCAGE Number U0B22
IIMS Corporate Membership Number C508
Nautical Institute Membership Number CA00059