What’s in a hatch cover testing kit?
An ultrasonic hatch cover testing kit has four core parts: a transmitter, a receiver, an inspection microphone on an extension arm, and headphones. Around them, a good kit adds a device for checking the equipment before each survey, a reliable power supply, protective cases and a few practical accessories that make testing on deck quicker and safer.
This guide explains what each part does and what to look for. New to the subject? Start with what an ultrasonic hatch cover tester is.
The transmitter
The transmitter sits inside the closed hold and fills it with a steady ultrasonic signal. In an empty hold it goes on the floor; with cargo, on top of the stow.
Look for:
- a powerful, uniform output that reaches every part of the hatch cover
- several emitters arranged to spread the sound evenly through the hold
- a clear indicator that it is working, and a low-battery warning
- a power input socket, so it can run from an external supply if the batteries run low
- anchor points, so it can be lowered or suspended when there is no flat surface


The receiver
The receiver is the handheld unit the surveyor carries on deck. It turns the ultrasound picked up by the microphone into a reading.
Useful features include:
- readings in decibels (dB) or as a percentage of the Open Hatch Value (OHV)
- a control for setting the OHV reference
- a peak-hold function, which keeps the highest reading on screen
- a backlit display that can be read in any light
- neck and waist straps, so both hands stay free on deck
Inspection microphones and extension arm
The inspection microphone is what actually finds the leak. A slim, flexible microphone can be worked between hatch cover joints, and a bright colour makes it easy to see on deck.
It fits onto a telescopic extension arm – typically reaching around 1.15 metres – so the surveyor can test seals while standing. A spare microphone and an emergency microphone lead mean a damaged part won’t end the survey.

Headphones
Headphones let the surveyor hear a leak as well as see it on the display, which makes it quicker to pinpoint. Look for headphones that can be worn with a hard hat, and a splitter if a second person needs to listen in.
Equipment checks and calibration
Before each survey, the equipment should be checked. Good kits include a test device that confirms the transmitter’s emitters, the microphones, the extension arm and the emergency lead are all working.
The kit should also come with a certificate of calibration and conformity. Calibrated, type-approved equipment gives repeatable results that can be relied on for class and P&I surveys – see UR Z17 and ABS Type Approval explained.
Power
Most kits run on standard AA batteries – ideally rechargeable, with a charger that also works from a vehicle. Check how long the transmitter and receiver last on one set of batteries, and whether the transmitter can run from an external supply such as a car battery if needed.

Accessories that make testing easier
Small extras can make a big difference on board:
- A cradle – to lower the transmitter onto cargo through a partly opened hatch
- Chalk – to mark the exact position of each leak for repair
- A hi-vis vest and straps – for safety when moving around the deck
- Weatherproof cases – to protect the units in rain and spray
- A compact carry case – ideally light enough to take on a plane as hand luggage
About CARGO-SAFE™
The complete CARGO-SAFE™ Mk2 kit contains:
- Transmitter and receiver, each in a leather case (IP66 when closed)
- Two inspection microphones and a microphone extension arm (up to 1.15 m)
- Headphones and a 3.5 mm headphone splitter
- Emitter, microphone and extension arm tester
- Emergency microphone lead and a 9–24 V power input lead
- 20 rechargeable AA batteries and a charger with car adaptor
- Cradle for lowering the transmitter, a stick of chalk, a hi-vis vest and straps
- Certificate of calibration and conformity, and the operation manual
- Black plastic carry case
The transmitter delivers 157 dB at 40 kHz and runs for about 4.5 hours on six AA batteries (with a standby mode that extends this); the receiver runs for about 15 hours on four. Both work from −20 °C to +60 °C and carry a three-year warranty. The kit weighs about 1.5 kg in use and 2.4 kg complete with batteries, so it can travel as hand luggage.
