Touchstone™ 2 Jauge d'épaisseur de revêtement

Présentation du Touchstone 2

The Touchstone 2 coating thickness gauge is easy to use and requires no couplant, it will work on rough surfaces in any condition.

This coating gauge uses the magnetic properties of the substrate material to determine the coating thickness – ie the distance the sensor face is held off the steel by the coating. The Touchstone 2 Hall effect sensor will measure a wide range of non-magnetic coatings on ferrous substrates including;

  • paint, plastic, stainless steel, galvanised zinc, aluminium and tin
  • Highly accurate Hall effect sensor
  • Measures any non-ferrous coating
  • Measures up to 8mm of coating
  • Simple calibration and operation

Citation requise

Touchstone 2 Applications

ShippingTouchstone 2 Coating Thickness Gauge Application

Civil engineering

Petro-chemical

Offshore

Automotive

Research

Le complet Touchstone 2 kit includes:

  • Touchstone 2 coating thickness gauge
  • Steel block
  • Non-magnetic calibration block
  • Hall effect sensor
  • Notice d'utilisation complète
  • Spare 9v PP3 battery
  • Étui de transport en polymère noir doublé de mousse

Touchstone 2 Spécifications techniques

Coating range: 0-8mm, 0-0.313 inches
Applications: Any non-ferrous coating on a ferrous material.
Resolution: 10 microns
Accuracy: ±10microns up to 1mm then 1.5%
Display: 12.5mm high 3½ LCD Display with micron/thou and low battery indicator.
Auto shut off: After 3 minutes inactivity.
Units of Measurement: Switchable between microns and thousandths of an inch
Unit Dimensions: 145 x 80 x 40mm
Unit Weight: 160g
Temperature range: -10ºC to +50ºC
Alimentation: 1 pile 9V PP3
Battery life: 40 hours nominal with a PP3 alkaline battery
Carry Case Dimensions:  220 x 200 x 80mm
Operational weight: 150g
Shipping weight 800g

1. Calibrate the sensor by placing it on both the uncoated steel block the non-magnetic calibration block.

2. Press the sensor firmly on the coated surface and the thickness of the coating will be displayed

Approbation du processus de fabrication par l'American Bureau of Shipping Classification Society
Numéro de certificat ISO 9001: 2015 14124458
NATO Stock Number 5220-99-464-9595
Numéro NCAGE U0B22
Directives et lois de la marque CE 89/336 / CEE (Compatibilité électromagnétique)
Numéro d'adhésion d'entreprise IIMS C508
Numéro de membre NFPA 2800960
Numéro de membre FPA 27135

 

fr_FRFrançais